Products & Manufactured Components

High-precision stamped parts, deep-drawn enclosures, electrical motor laminations, precision turned bushes, and custom-engineered sheet metal assemblies.

Electrical Assemblies Alternator Stator Core Stack Lamination

Alternator Stack

High-permeability stamped electrical silicon steel laminations stacked with precision interlocking slots for automotive and industrial alternators.

Material:CRNGO / Silicon Steel
Process:Progressive Stamping & Stacking
Application:Automotive Charging Systems
Sheet Metal Stamping Brush Box Base Plate for Starters

Brush Box Plate

Precision pierced and formed sheet plate for automotive starter motor brush holders, featuring burr-free rivet apertures and surface passivation.

Material:Mild Steel CRCA / Brass
Process:Compound Tool Stamping
Plating:Zinc Trivalent / Nickel Passivated
Precision Machined Precision Machined Flanged Bushing

Precision Bush & Sleeve

CNC turned and ground cylindrical bushes with close concentricity, internal chamfers, and mirror surface finish for low-friction assemblies.

Material:Alloy Steel / Brass / Bronze
Tolerance:±0.008 mm Bore Clearance
Application:Rotating Shaft Assemblies
Insulated Assemblies Epoxy Coated Stator Magnetic Core

Epoxy Coated Stator Core (Type A)

Fluid-bed electrostatic epoxy coated stator core assembly engineered for maximum dielectric insulation and slot winding protection against moisture.

Coating:Electrostatic Epoxy Resin
Dielectric:> 2.5 kV Breakdown
Application:Submersible Motors & EV Drives
Insulated Assemblies Epoxy Coated Armature Component

Epoxy Coated Core (Type B)

Specialized armature rotor core with edge-radiused tooth geometry coated with high thermal endurance Class-H thermosetting epoxy compound.

Coating:Class H (180°C Rated)
Coating Thickness:120 - 250 Microns
Application:Heavy Commercial Vehicle Starters
Insulated Assemblies Epoxy Coated Pole Shoes

Epoxy Insulated Pole Shoes

Curved magnetic pole piece laminations with uniform protective epoxy encapsulation preventing eddy-current losses and field coil abrasion.

Core Material:Low Carbon Sheet Steel
Edge Quality:Full Rounding & Radius
Application:Permanent Magnet DC Motors
Pressed Sheet Metal Multi-Blade Stamped Cooling Impeller Fan

Cooling Impeller Fan

Dynamically balanced pressed steel impeller fan with aerodynamically contoured blades for electric motor and alternator cooling air flow.

Material:Deep Drawing Steel CR4
Forming:Progressive Multi-Station Die
Balance:Static & Dynamic Verified
Deep Drawing Formed Sheet Metal Enclosure Housing

Formed Motor Housing

Hydraulic deep-drawn cylindrical casing with precise concentric mounting lips, ventilation perforations, and internal bearing press fits.

Material:Extra Deep Draw CRCA (EDD)
Press:150-Ton Hydraulic Forming
Finish:Cathodic Electro-Deposition (CED)
Power Press & CNC Bending Heavy Duty Formed Mounting Bracket

Heavy Duty Mounting Bracket

High-tensile structural bracket engineered for severe vibration, featuring precision pierced slotted fastener holes and CNC press brake bend consistency.

Material:High Tensile Steel E350 / SS304
Thickness:3.0 mm to 6.0 mm Plate
Application:Chassis & Industrial Machinery
Electrical Insulation High Density Electrical Pressboard Barrier

Die-Cut Pressboard Barrier

High-purity cellulose electrical pressboard cut with precision rule dies for phase barriers, end insulation, and terminal block separation in transformers and motors.

Grade:IEC 60641-3 Calendered
Dielectric:> 12 kV/mm in oil/air
Application:Transformers & Starter Motors
Vulcanized Fiber Vulcanized Red Fiber Insulating Washer

Red Vulcanized Fiber Spacer

Dense, impact-resistant vulcanized red fiber washers and spacers offering electrical isolation, solvent resistance, and mechanical cushioning under bolt torque.

Material:Vulcanized Red Fiber HGW
Thickness:0.5 mm to 3.2 mm
Application:Switchgear & Automotive Starters
Precision Stamped Precision Mechanical Stop Plate

Precision Stop Plate

Mechanical actuator stop plate manufactured to rigorous flat tolerances, ensuring smooth locking detent action in automotive linkages.

Material:Hardened Carbon Steel / SS
Flatness:< 0.05 mm Overall
Finish:Black Oxide / Zinc Flake
Raw Material Integrity

Raw Materials & Technical Standards

We source prime-grade certified raw materials accompanied by Mill Test Certificates (MTC) to guarantee tensile strength, chemical composition, and forming behavior.

Metal Category Common Grades Processed Thickness Range Key Applications
Mild Steel (MS) CRCA IS 513 (CR1, CR2, CR3, CR4 / EDD), HR IS 2062 Grade E250 / E350 0.5 mm to 20 mm Brackets, chassis, deep drawn motor shells, switchgear cabinets, fans.
Stainless Steel (SS) AISI 304, AISI 316, AISI 316L, AISI 430 (Ferritic & Austenitic) 0.5 mm to 12 mm Corrosion-resistant medical hardware, food processing frames, outdoor panels.
Aluminium Alloys AA 5052-H32, AA 6061-T6, AA 6082-T6, Commercial 1050 0.8 mm to 16 mm Lightweight automotive heat shields, heatsinks, electronic enclosures.
Brass & Copper Cu-ETP Electrolytic Copper, CuZn37 / CuZn40 Cartridge Brass 0.5 mm to 8 mm High-conductivity busbars, electrical contact plates, brush boxes, grounding clips.
Galvanized Iron (GI) IS 277 with Zinc Coating (GSM 80 to GSM 275) 0.6 mm to 4.0 mm HVAC duct brackets, solar mounting rails, electrical junction boxes.
Electrical Silicon Steel CRNGO Semi-processed / Fully-processed (M43, M47, 50A470) 0.35 mm & 0.50 mm Alternator stacks, stator packs, transformer E&I laminations, motor cores.
Turnkey Process

How We Manufacture As Per Your Drawing

A disciplined 5-stage contract manufacturing execution process from blueprint review to production ramp-up.

01

Drawing & CAD Submission

Client shares 2D prints (.DWG, .DXF, .PDF) or 3D models (.STEP). We sign Non-Disclosure Agreements (NDAs) to protect your proprietary IP.

02

DFM Feasibility & Quotation

Our tooling engineers assess bend allowances, tonnage requirements, and nesting layouts to submit a competitive, itemized cost proposal.

03

Prototype & Tooling Sampling

Rapid stamping and press prototyping. We manufacture pilot samples with full dimensional inspection reports (FDIR) for client sign-off.

04

Mass Serial Production

Hardened progressive tooling or multi-axis CNC cells run batch production with scheduled stage-wise SPC inspection and burr control.

05

Finishing & Safe Packaging

Powder coating or zinc plating applied, followed by VCI anti-rust wrapping and batch-coded packaging for safe transit across India.

Require Custom Development Or Sample Tooling?

Contact our engineering cell directly with your component specifications.

Contact Technical Team